Threaded fittings are widely used in piping systems to create a leak-tight connection between pipes. It is one of the most used parts for household piping today.
Main characteristics of parts
Despite the fact that new connections appear on the market every year, threaded fittings have also been widely popular for decades.
Their use is justified in the following pipelines:
- Hot and cold water supply;
- Gas pipeline;
- Irrigation systems;
Other technical pipeline systems.
Fastening and tightness is carried out by a tight connection using a thread or specially designed materials such as FUM tape or linen span.
A variety of threaded fittings allows you to make a connection of any diameter and any technical complexity. There are no restrictions on the pipe material for them, therefore, fittings are widely used for connecting pipelines made of metal, as well as plastic and corrugated pipes. Fittings allow you to create a collapsible structure that can be altered at any time or replace one of its parts in the event of a leak.
Parts are made from various materials. These can be the following types:
- Cast iron
The cost usually depends on the material of manufacture of the threaded fitting.
Types of threaded fittings
Threaded fittings are of various types. They differ among themselves in all sorts of characteristics. This variety of parts allows you to create connections of any type and complexity. Depending on the type of connection, the thread of the fitting can be external or internal. The most commonly used parts when connecting:
- Threaded couplings
- Threaded tees
- Threaded bends
- Threaded fittings
- Threaded squares
Depending on where and for what the sprinklet socket malaysia will be used, selection is carried out. The main purpose of selecting the desired part is not only the reliability of the future connection, but also the ability to connect the pipeline at different angles of inclination and several pipes at the same time.
Brass threaded fittings are the most common parts on the market. Their distinguishing feature is the presence of a clamping ring inside the part. It provides additional tightness to any joint by squeezing and sealing at the point where the ring will be squeezed with a wrench.
When working with such fittings, you need to be careful and know the measure when tightening. This will allow the fittings to be secured without pinching them.
Coated fittings have anti-corrosion properties, which are indispensable when working with plumbing.
So, when using threaded fittings, there is no need for welding, thereby, the tightness of the connection is not disturbed. It is important to add to all these qualities that the pipeline connected using these parts is collapsible, it can be changed at any time, if necessary. Pipelines of this type can be carried out independently.
Such a compound also has negative qualities, which, however, do not particularly affect the quality of operation. Among the disadvantages is the need for more thorough care of the joints. Threads may loosen over time. In order to fix this, you just need to tighten the nut.
In our online store, each customer will find a wide selection of threaded fittings, as well as the pipes themselves. The convenience of the store is undeniable: convenient catalogs allow you to examine a part before buying and study it carefully. Fast delivery will delight anyone who values their time. In addition, on our website, buyers can buy a thermostat for a warm floor, pipes, diesel heat guns and much more.